Comparison chart for laars lite pool heater 
Top 10 laars lite pool heater Based on User Rating
- Hot surface ignitor for Teledyne Laars/Jandy Lite LLD and Lite 2 LD pool heaters
- Fits Zodiac Jandy Lite2LD pool and spa heater models 125, 175, 250, 325 and 400
- Pressure switch for Jandy Laars pre-set to 2 psi.
- Part Number:R0023200
- This high-limit switch assembly is designed to use with Zodiac Jandy Lite2 LD, LG, LJ pool and spa heater model 125, 175, 250, 325, 400 and also compatible with Zodiac Jandy LX/LT and LX/LT Low Nox Spa Heater models 250, 400.
- Features: High-limit switch assembly replacement. Fits Zodiac Jandy Lite2 LD, LG, LJ pool and spa heater model 125, 175, 250, 325, 400. Also fits Zodiac Jandy LX/LT and LX/LT Low Nox Spa Heater models 250, 400.
- Door with latch assembly replacement
- Fits Zodiac Teledyne Laars Lite Pool and Spa Heater models LLG125, LLD125
- Electronic temperature control assembly replacement kit
- Fits Zodiac Jandy Lite2 LD, LG pool and spa heater models 125, 175, 250, 325, 400
- Also fits Zodiac Jandy Hi-E2 Pool and spa heater models 220, 350
- Dual thermostat
- Genuine Jandy
- Part Number: R0058200
- Get Ready For The Pool Season With Preventative Maintained On Your Pool Equipment
- No Assembly Required
- Endless On-Demand Hot Water; Consistent hot water when you need it that never runs out; Continuously monitored water temperature and controlled flow rates ensure efficiency and consistent performance within 1 degree of selected temperature
- Save Space; EcoSmart tankless electric water heaters are 90% smaller than traditional tank heaters; may be installed on wall or at point of use; Dimensions 11.5 x 8 x 3.75 inches
- Save Energy; EcoSmart tankless electric water heaters are 99% thermal energy efficient; Only heats water when called unlike a tank heater that maintains water temperature even when not being used.
- EcoSmart ECO 11 Sizing; 13-kilowatt tankless electric water heater ideal for providing hot water for a bathroom, small sink, office breakroom and other point-of-use or low-flow applications; provides between 1.3 and 3.1 gallons-per-minute depending on the inlet water temperature; refer to the sizing guide to select the proper solution
- Comes with screw contact connections instead of sliding contact connections; adapters/terminals needed
- [Immediate heating] (Do not touch water during use to prevent electric shock!!!)The bathtub heater has a rated power of 1500W, which can quickly heat 5 gallons of water. The outer shell is made of high-quality stainless steel and has a porous design with good thermal conductivity.Note: Our products are not suitable for heating swimming pools, only suitable for heating bucket or bathtubs.
- [Safe and reliable] The heater has an automatic power-off function. When the water temperature reaches about 120~160 degrees Fahrenheit, the water heater will automatically stop heating, effectively avoiding fire.Notice: Do not touch water during use to prevent electric shock!The probe of the thermometer needs to be placed at the top of the water instead of the bottom, so that the temperature can be displayed normally.
- [Easy operation] Just immerse the heater completely in the water. It is best to lay the heater horizontally at the bottom of the bathtub. Be careful not to touch the water with your hands when working. If the thermometer does not work, please contact customer service for replacement.
- [Precautions]1.Do not touch water during use to prevent electric shock! 2. The water heater must be completely immersed in water before power on. 3. The power must be disconnected before taking out the water heater. 4. Do not use it continuously for more than 3 hours! 5.Please do not plug the two heaters into the same outlet to avoid fire hazards.
- [Wide application] Portable water heater can be used in bathtubs, wooden barrels, washbasins, washing in winter, camping, traveling, etc.
- ☀[Heat water faster]: 1500W high-power immersion water heater can make 5 gallons of water warm in a few minutes. While camping can bring this portable bucket heater and can enjooy shower even outside .In the cold winter, you no longer need to wait for a long time for warm water. When you get an above grond pool heater , you can enjoy hot water in just a few minutes.
- ❀[Safety Protection] This UL Certified immersed portable hot tub heater with 304 stainless steel cover guard. Heating in water for a long time will not cause rust,effectively preventing burns. Bathtub heater comes with the digital LCD thermometer whcih can show the temperature easily and can enjoy with the comfortable warm water
- ♥ [Easy to Use] Just put the US Version pool warmer for inflatables into the water and connect it to power supply without much fuss.. Please note that the heater must be completely immersed in water during use. Through water temperature measurement, you can base on temperature. Note: It is recommended that the continuous use of the tap water heater should not exceed 3 hours.If heat the small pool above ground inflatable pool please kindly check the pool size before purchasing.
- ♛[Portable and Versatile]: You can use the portable electrical submersible heater in many occasion. It supports to use in containers of different sizes, such as buckets, basins, bathtubs, mini inflatable portable swimming pools, etc. Please note if using in outdoor Inflatable swimming pool one should not be enough and not suggest to use for big swimming pool .This is the first choice for home and outdoor work.This portable electric camping water heater is handy and super lightweight
- [Warnings]: Do not ever use this immersion heater for inflatable and bathtub to heat. While using water don’t put your hand into the liquid when the electric water heater is plugged in.When the liquid is hot, unplug the immersion heater element then take out from the container.The protection plug of leakage is not a power switch.Make sure the water level is enough before use. Read the instructions carefully before using .Do not plug two heaters on the same outlet .
What to Consider Before Buyinglaars lite pool heater
When looking to buy laars lite pool heaterthere are a few things you should keep in mind. Here are some important factors to think about before making your purchase:
Realize your requirements
The first step is to figure out what your needs or requirements are. When you not know about your own needs than its most possible to choose the wrong product may it can be a waste of good amount of investment.
Understand Your NeedsThe first step is to understand your demands or requirements. If you aren’t aware of your needs, there’s a big chance you’ll spend a lot of money on the wrong things at the wrong time. So, first and foremost, we recommend that you carefully consider your requirements for a product. Simply create a list of your requirements. This simple activity will assist you in simplifying your purchasing experience. Then you will be able to know your prioroties which is the most important thing.
Budget Vs PriceBefore you go for buying anything, one thing you must think about is budget. Any amount can be set on the price tag of your desired product. That depends on different expences like raw material purchasing, manufacturing, transportation, operational costs and their brand value playes a huge role there. When you demand for a higher quality product, you should be prepared enough to spent that level of bucks. That’s why budget matters so much. And this universal truth is effective for your best item as well. You may heard this popular sayings, “Cut your coat, according to your cloth”. Make a search on the internet and find those products first whom you really need. Analyze their prices and features thoroughly.Now you need to accumulate those information and make a proper comparison which will help you to choose the best one. The biggest question may come to your mind at this point which is your pocket is ready to spent such amount of money to buy this best or not. Without any hesitation, go for it if the answer is yes. But if not, then remember, you always have the second best option to choose yet.
Select the Correct BrandMost of the time, we are biased toward certain brands due to emotional attachments. This practice has a positive impact on some people and has a negative impact on others. However, there is no way to argue with the concept of relying on well-known brands. After having enough money in your pocket its going to half way easy to make decision of purchasing. But one thing remains, if you are not 100% sure that your brand of choice makes the best product that you are seeking for. As a result, you must exercise extreme caution when determining whether or not you are selecting the appropriate brand for your specific product. People are classified into two categories. One is completely reliant on a specific brand, while the other is unconcerned. What he requires is the right product for the amount he is paying. The category that you belong maybe unknown to us.Don’t worry here you will get few hints which will be beneficial for choosing the best product from the right brands.
- You must be well-versed on the brand.
- What others are saying about this brand.
- Try to calculate the avarage rating score of your choosing products of that brand.
- Contrast the features with those of competitors.
- Are those features sufficient for your needs?