carve on a longboard

How to Carve on a Longboard

Longboarding is a popular sport that has been around for a pretty long time. Whether you are new to this, or if you have been doing it for a while now, carving on a longboard is absolute must know-how when it comes to this activity.

In today’s article, we will be looking at some of the longboard carving tips and tell you how to make your longboard carve more (or even just carve it in general if you are an absolute beginner).

How to Begin Carving

Here’s the entire process for you.

Step 1: Finding a Location

The first thing that you should do before you start carving is to look for an open, slightly hilly area. Conquering small hills is a great way to start off your longboard carving journey.

Step 2: Perfecting Your Stance

Once you have decided on the location, stand on the very top of a hill in a regular boarding stance, and keep your dominant foot on the longboard. Next, give yourself a slight push with the foot that was on the ground; this will send you rolling down the hill at a moderate pace.

Step 3: Heel Carving

While you are at it, bend your knees a bit and shift most of your weight to the heels of your feet. This will put you in a position that will make it seem as if your toes are pointing upward and your heels downwards. Now, since we started off at a regular posture, you will find yourself drifting towards the left, and that’s fine!

Don’t try to change your direction or move towards the right, as this will throw you off balance and can lead to some serious injuries. Instead, once you have reached the bottom of the hill, come to a steady stop.

Step 4: Toe Carving

Once you feel confident enough, push yourself with your back foot again, and repeat the same process as before. However, this time after bending your knees, instead of pointing your toes skywards, you should try to adopt a stance that makes it seem as if you are standing on your tippy-toes.

Afterword

Do remember that you do not need to physically stand on your toes because this will cause you to lose balance or fall off of the longboard. If you are doing it right, you should be able to feel your board incline itself in the position you are trying to implement under your feet. Once you get this part down, you will see yourself veering to the right side of your boarding area, and that is exactly what we are going for. With enough practice, you will know how to carve tighter on your longboard in no time!

How to Make Your Longboard Carve More

If you are looking for a way on how to make your longboard carve more, then all you need to do is shift your position so that you are tilting slightly more toward the left or right (depending on which technique you are using), and you will immediately find yourself doing a wider surf.

Moreover, wider carving also helps to slow down your longboard’s speed whenever you feel like you are going too fast. However, you need to keep in mind that you will not be able to master the art of carving in a few hours.

Depending on your learning capability, it could take you days or even weeks to fully incorporate the above-mentioned techniques into your surfing. We would advise you to take it step by step.

Getting Started

Start off by trying to learn the heel carving technique to the point where you start to feel totally confident while doing it. Once you have reached this far, move on to practicing the toe carving method every day. This method is a bit tricky and will, therefore, require you to invest more blood, sweat, and tears in it.

Do not get disheartened, though, as every longboard surfer has gone through this stage at some point in their lives, and most of them made it through in the end. All you need is determination and a really strong will-power.

The Stance

By the time you have successfully mastered both the heel and toe carving techniques, you will be ready to shift from one method to the next without stopping at regular intervals. At this point in your surfing career, you will also slowly get the gist of how to make U-turns on your longboard with the help of these methods.

The Process

Before you get this down, however, we would advise you to stop and take small breaks at regular interludes just to catch your breath and steady yourself a bit before you roll off to a new start.

As mentioned a couple of times before as well, learning how to switch from one method to the next also requires practice and a lot of patience.

There will be times when you will come to an abrupt stop at the end of each routine purely out of habit, and there will also be moments where you might feel disoriented by the sudden change in directions.

One of the best longboard carving tips that we can give you is to never stop pushing. It is only by repeatedly challenging yourself will you be able to advance to the next level, and before you realize it, you will have mastered the beautiful art of carving on your longboard.

Additional Safety Tips to Remember

Keeping your safety and well-being in mind, we have decided to brief you through some of the dos and don’ts related to carving on a longboard. Even though most of these are basic safety knowledge, a lot of times, we might actually forget to follow these rules, and that usually leads to serious blunders on our part.

Wear Protective Gear

This one is very obvious, but we have seen many longboarders go around town without wearing safety gear. Especially if you are a beginner at carving, then you should definitely consider getting a helmet and knee and elbow pads from your local sports store, just to stay on the safe side.

We don’t want you to suffer from some serious injuries, after all.

Try to Surf in Groups

Being in a group helps you be more visible to other vehicle drivers and thus reduces your chances of getting run over by a careless person.

Wear Bright Colors

Wearing colors such as bright pink, yellow, and even lime green will make you more noticeable to the people around you and will therefore save everyone from a lot of mishaps.

Don’t Joke around on the Streets

Similarly, if you are joking around while longboarding, it will divert your attention away from the street in front of you, and this could be tremendously hazardous.

Conclusion

We hope we were able to guide you through your carving journey with the longboard carving tipsthat we shared with youtoday. If so, then please do remember everything that we have mentioned so far, and before you start off, do some more research on your own as well.

The more research you do, the safer and more confident you will feel when you set foot on your longboard before the very first push.

Thank you so much for staying with us until the very end. We hope to see you soon, and till then, carve away!

Longboard Road Rider Hacks
Longboard Grip Tape Cleaning Method
Riding Affect the Size of the Longboard
Longboarding on the Uphill

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *